Selling New Out Swing Metal Lite Duty Commercial Door Units
Door Unit measures overall - 48" with the frame by 80 3/4" - 81"
Frame is Metal C-Channel
Frame depth is 3 3/4"
Frame is 2" wide
Door only measures 46" x 80"
Hinge Pins can not be removed
Door units are designed to be Left or Right Hinged door--- frame top and bottom is the same and door knob bore hole is centered.
Pictures 1-2)
Exterior side if used as Out Swing Door Unit
Picture 3)
Door is Metal on both sides and on all four edges and door knob bore hole as Nylon insert
Picture 4)
Top and Bottom of the door has two rubber weather stripping and there is channel in end edge
Picture 5)
Shows the Hinge pins
Pictures 6-7)
Shows Metal C-Channel Frame
There are predrilled holes for installing the door unit-- also a long screw gets put in each hinge as well.
Picture 8)
Shows the Interior side or the side you would see if you install it as a In Swing Door Unit
Picture 9)
Show the box label Door units are Brand new In the box
Picture 10)
Screws send with each door unit
Door units are by Havard Products--- almost 100 % same Cannon ball Door Units.