Gravely 16G Riding Tractor w/50" deck - $1,900 (Honey Brook)

Gravely 16G Riding Tractor w/50" deck 1 thumbnailGravely 16G Riding Tractor w/50" deck 2 thumbnailGravely 16G Riding Tractor w/50" deck 3 thumbnailGravely 16G Riding Tractor w/50" deck 4 thumbnailGravely 16G Riding Tractor w/50" deck 5 thumbnail
condition: excellent
make / manufacturer: Gravely Riding Tractor
model name / number: 16G model 43781
Gravely 16G model 43781 Windsor Pa. 2021 2022 updated 5 5 2024.

Tractor has an engine driven hyd system and a hand clutch.
The tractor has a Kohler M18S engine with s/n show contact info .
Spec 2463 and was built in 1997.

The hyd. filter and fluid were replaced.

The engine was removed to determine its condition. It was found to be in very good condition. The spark plugs were replaced and the carb was rebuilt. The engine oil and filter were replaced. A fuel filter and a shut off valve were installed

Installed hour meter..

The cooling fan screen was replaced

It was determined that the transmission had a bad PTO and so the transmission was replaced with a transmission having a new PTO plus gaskets seals and several bearings.

An oil alert light was installed on the tractor.

The AMP gauge was replaced and a volt gauge was also installed. The PTO safety switch was replaced and the electrical wiring was repaired as required. All lights work.

The tractor has two new 23 x 1050 x 12 tires on the rear. Rear wheels were primed and painted when the new tires were installed.

The forward clutch lining was replaced and the bearings on both the forward and reverse clutches were serviced and replaced as required. The reverse clutch has a new bearing.

The area under the fuel tank was cleaned and painted. The fuel tank was drained, cleaned and painted.

The front axle bolt and bushing were replaced and all the steering mechanism was greased.

The brake works well.

Installed new seat.

A newer, larger battery was installed.

Tractor was cleaned, primed and painted.

New decals were applied to tractor.

50" deck repairs: S/N 051312
All bearings in all the spindles were replaced. All spindles attaching bolts were replaced.
Both flat idlers were replaced.
Replaced two bearings in both deck wheels.
Replaced two mounting U brackets along with the hardware and bushings
Repaired one rust spot on deck
Put 3/16" by 1" metal strip on front of deck.
Replaced all grease in gear box.
Sharpened and balanced all blades. Replaced with new nyloc nuts.
Cleaned entire deck
Applied Eastwood rust preventing paint to bottom of deck
Primed entire deck
Applied finished coat to entire deck
Applied new decals.

post id: 7744930253


best of [?]